Eagle Brewing BE510 Siphon Spray Wort Aerator

#ad
#ad
JGB Enterprises BE510 #ad - Attach this aerator/diffuser to the end of your transfer tubing when filling your fermenter. Use ce20 hose thread adaptor to attach to your sink. 7 lbs. No need to rock or shake a heavy fermenter with this aerator/diffuser. It works with 3/8" tubing. The jgb enterprises siphon wort Aerator was made to increase dissolved oxygen in your wort without having to rock or shake a heavy fermenter.

Increase dissolved oxygen in your wort.

More information about JGB Enterprises BE510 #ad

bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM

#ad
#ad
bayite #ad - Item included: 1x dc 12v solar hot water circulation pump 1x ac 110v- 240V to DC 12V 2A Power Supply Adapter Circulation pump is non-self-priming pump 0 suction height. Plug type: 2. 1mm x 5. 5mm female. W/ two brass couplerCirculation pump is non-self-priming pump 0 Suction Height. Power source: dc 12vpower adapter included.

Please note: if you use this pump for circulating wort it should be cleaned out after using it. Max circulating water temperature: 100°c/212°F. This doesn't mean the pump produces 145PSI. Fit both 1/2" npt and BSP female thead. One year warranty: replacement or full refund without return. Max system pressure: 10Bar145PSI.

bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM #ad - Max flow rate: 2. 1gpm, max discharge Head: 9. 8ft. It's perfect for the home solar water heating systems or other circulation pump application. Brushless motor, super long working life, low consumption and low noise Power source: DC 12VRated current: 07a low noise: 30db at 1 metreservice life: 30000 hours up Inlet/Outlet: 1/2" male thead.

More information about bayite #ad


Similar products



White SiliconeTubing, 3/8"ID, 1/2"OD, 1/16" Wall, 10' Length

#ad
#ad
Small Parts #ad - It's submersible but can't be immersed in hot water exceeding 50°C/122℉. Circulation pump is non-self-priming pump 0 suction height. Flexible tubing for air, food, water, and beverage. Silicone rubber for resistance to high temperatures, oils, ozone, detergents, and salt water. Translucent for visual inspection of fluids.

. Please note: if you use this pump for circulating wort it should be cleaned out after using it. Max circulating water temperature: 100°c/212°F. 1/2" male thread on the pump. Power source: dc 12vpower adapter included. Max system pressure: 10Bar145PSI. Plug type: 2. 1mm x 5. 5mm female. Operating temperature range of -150 to +500 degrees F.

White SiliconeTubing, 3/8"ID, 1/2"OD, 1/16" Wall, 10' Length #ad - This doesn't mean the pump produces 145PSI. Rated current: 07a, brushless motor, low noise: 30db at 1 metre, Service life: 30000 hours. The od of the brass coupler is 3/8''10mm. Max flow rate: 2.

More information about Small Parts #ad


Similar products



Home Brew Stuff SS-WV2 1/2" Stainless Steel Valve Weldless Bulkhead For Home Brew Kettle

#ad
#ad
Home Brew Stuff SS-WV2 #ad - Plug type: 2. 1mm x 5. 5mm female. Meets nsf-51 standards for food equipment material. Please note: if you use this pump for circulating wort it should be cleaned out after using it. Max circulating water temperature: 100°c/212°F. Seals are all high temp silicone. Rated current: 07a, brushless motor, low noise: 30db at 1 metre, Service life: 30000 hours.

Home Brew Stuff SS-WV2 1/2" Stainless Steel Valve Weldless Bulkhead For Home Brew Kettle #ad - 1/2" stainless hose barb. It means the pump can be connected to the system less than 145PSI pressure. Circulation pump is non-self-priming pump 0 suction height. Power source: dc 12vpower adapter included. 1/2" male thread on the pump. It has standard 2 piece full port valve, and 1/2\" hose barb. High temp silicone seals.

This doesn't mean the pump produces 145PSI. Max flow rate: 2. 1gpm, max discharge Head: 9. 8ft. Max system pressure: 10Bar145PSI. Operating temperature range of -150 to +500 degrees F.

More information about Home Brew Stuff SS-WV2 #ad


Similar products



Stainless Steel 304 Cast Pipe Fitting, Coupling, Class 150, 1/2" NPT Female

#ad
#ad
Merit Brass KP411-08 #ad - Rated current: 07a, low noise: 30db at 1 metre, brushless motor, Service life: 30000 hours. Circulation pump is non-self-priming pump 0 suction height. One year warranty: replacement or full refund without return. Meets nsf-51 standards for food equipment material. Plug type: 2. 1mm x 5. 5mm female. 1/2" weldless bulkhead fitting fits 7/8" kettle hole.

Stainless steel full port ball valve. The od of the brass coupler is 3/8''10mm. 1/2" male thread on the pump. Class 150 fittings conform to standards ANSI B1. 201 and iso 49 for quality assurance. Pipe fittings are components used for connecting, controlling flow, terminating, and changing the direction of piping in many different industries.

Stainless Steel 304 Cast Pipe Fitting, Coupling, Class 150, 1/2" NPT Female #ad - It means the pump can be connected to the system less than 145PSI pressure. Merit brass distributes pipe fittings to the United States and Canada. Coupling for connecting and extending pipes going in the same direction. Made of stainless steel 304 for strength. Merit brass manufactures pipe nipples following ISO 9001 standards for quality assurance.

More information about Merit Brass KP411-08 #ad


Similar products



Brewer's Edge Mash and Boil

#ad
#ad
Brewers Edge #ad - This doesn't mean the pump produces 145PSI. No need for an outdoor burner, complicated brewing stand, or a 220 volt special circuit - it plugs into any 110 volt GFI household outlet. Circulation pump is non-self-priming pump 0 suction height. The od of the brass coupler is 3/8''10mm. 1/2" stainless hose barb.

Operating temperature range of -150 to +500 degrees F. For example, load it with strike water, and have it set to be hot when you come home from work to save time. Female national pipe Taper NPT threads for connecting two male pipes. Please note: if you use this pump for circulating wort it should be cleaned out after using it.

Brewer's Edge Mash and Boil #ad - Max circulating water temperature: 100°c/212°F. Flexible tubing for air, food, water, and beverage. Silicone rubber for resistance to high temperatures, detergents, ozone, oils, and salt water. Translucent for visual inspection of fluids. It means the pump can be connected to the system less than 145PSI pressure.

Mash up to 16lb of Malt. The mash & boil features an adjustable thermostat switchable from Fahrenheit to Celsius with an adjustable run time preset at 3-1/2 hours for safety. Maximum capacity of 7.

More information about Brewers Edge #ad


Similar products



1/2" MPT x 3/8" Barb - Stainless by Midwest Homebrewing and Winemaking Supplies

#ad
#ad
Home Brew Stuff B013S23HJM #ad - Dimension - 1/2" mpt male Pipe Thread x 3/8". Meets nsf-51 standards for food equipment material. This doesn't mean the pump produces 145PSI. Max flow rate: 2. 1gpm, max discharge Head: 9. 8ft. Please note: if you use this pump for circulating wort it should be cleaned out after using it. Max circulating water temperature: 100°c/212°F.

Class 150 fittings conform to standards ANSI B1. 201 and iso 49 for quality assurance. It means the pump can be connected to the system less than 145PSI pressure. Installation instructions. Max system pressure: 10Bar145PSI. 1/2" weldless bulkhead fitting fits 7/8" kettle hole. Mash up to 16lb of Malt. Plug type: 2.

1/2" MPT x 3/8" Barb - Stainless by Midwest Homebrewing and Winemaking Supplies #ad - 1mm x 5. 5mm female. Power source: dc 12vpower adapter included. One year warranty: replacement or full refund without return. 304 stainless steel, class 150 fitting.

More information about Home Brew Stuff B013S23HJM #ad


Similar products



5214 Mash Tun False Bottom Adapter, Stainless Steel/Clear Tubing

#ad
#ad
HomeBrewStuff 5214 #ad - Flexible tubing for air, water, food, and beverage. Silicone rubber for resistance to high temperatures, detergents, ozone, oils, and salt water. Translucent for visual inspection of fluids. Operating temperature range of -150 to +500 degrees F. The od of the brass coupler is 3/8''10mm. This mash tun false bottom adapter Stainless version comes with everything you need to attach your domed false bottom to the back of your bulkhead or spigot.

Please note: if you use this pump for circulating wort it should be cleaned out after using it. Max circulating water temperature: 100°c/212°F. Mash up to 16lb of Malt. Female national pipe Taper NPT threads for connecting two male pipes. Installation instructions. Meets nsf-51 standards for food equipment material.

5214 Mash Tun False Bottom Adapter, Stainless Steel/Clear Tubing #ad - Circulation pump is non-self-priming pump 0 suction height. Rated current: 07a, brushless motor, low noise: 30db at 1 metre, Service life: 30000 hours. Stainless steel construction. Class 150 fittings conform to standards ANSI B1.

More information about HomeBrewStuff 5214 #ad


Similar products



1/2" FPT TO 1/2" BARB - Stainless Steel

#ad
#ad
Home Brew Stuff H618B #ad - One year warranty: replacement or full refund without return. 1/2fpt on one side, with a 1/2Barb on the other. 3/8" high temp silicone tubing. Rated current: 07a, low noise: 30db at 1 metre, brushless motor, Service life: 30000 hours. Circulation pump is non-self-priming pump 0 suction height. Please note: if you use this pump for circulating wort it should be cleaned out after using it.

Max circulating water temperature: 100°c/212°F. Female national pipe Taper NPT threads for connecting two male pipes. Flexible tubing for air, food, water, and beverage. Silicone rubber for resistance to high temperatures, oils, detergents, ozone, and salt water. Translucent for visual inspection of fluids.

1/2" FPT TO 1/2" BARB - Stainless Steel #ad - External stainless Steel 1/2in Valve. If you are not using a qd set or a ball Valve, this is a handy piece of Stainless for a direct connection. It's submersible but can't be immersed in hot water exceeding 50°C/122℉. Stainless steel construction. Dimension - 1/2" mpt male Pipe Thread x 3/8". Stainless steel full port ball valve.

More information about Home Brew Stuff H618B #ad


Similar products



CONCORD 304 Stainless Steel 3/8" Barb Hose to 1/2" NPT Home Brew Fitting. 2 Pack

#ad
#ad
Concord Cookware #ad - 2 hose clamps. 1/2" npt male fitting. Max flow rate: 2. 1gpm, max discharge Head: 9. 8ft. 304 stainless steel, class 150 fitting. 304 grade stainless Steel. Female national pipe Taper NPT threads for connecting two male pipes. Class 150 fittings conform to standards ANSI B1. 201 and iso 49 for quality assurance. Rated current: 0

CONCORD 304 Stainless Steel 3/8" Barb Hose to 1/2" NPT Home Brew Fitting. 2 Pack #ad - 7a, low noise: 30db at 1 metre, brushless motor, Service life: 30000 hours. Installation instructions. 1/2fpt on one side, with a 1/2Barb on the other. Power source: dc 12vpower adapter included. High temp silicone seals. 1/2" weldless bulkhead fitting fits 7/8" kettle hole. Operating temperature range of -150 to +500 degrees F.

Plastic construction. Highest Grade Currently Available. It's submersible but can't be immersed in hot water exceeding 50°C/122℉. Low carbon content for greater resistance to corrosion. Great for attaching 3/8" inner diameter hose.

More information about Concord Cookware #ad


Similar products



NY Brew Supply W3850-CV Super Efficient 3/8 x 50' Copper Wort Chiller

#ad
#ad
NY Brew Supply W3850-CV #ad - Max system pressure: 10Bar145PSI. This doesn't mean the pump produces 145PSI. Power source: dc 12vpower adapter included. 1/2" stainless hose barb. Plug type: 2. 1mm x 5. 5mm female. Great for attaching 3/8" inner diameter hose. Plastic construction. Works with 1/2 inch. High temp silicone seals. Installation instructions.

Low carbon content for greater resistance to corrosion. One year warranty: replacement or full refund without return. High quality brass hose adapter. With twice the copper of our standard 3/8 inch. Operating temperature range of -150 to +500 degrees F. Max flow rate: 2. 1gpm, max discharge Head: 9. 8ft. The od of the brass coupler is 3/8''10mm.

NY Brew Supply W3850-CV Super Efficient 3/8 x 50' Copper Wort Chiller #ad - Mash up to 16lb of Malt. Rated current: 07a, low noise: 30db at 1 metre, brushless motor, Service life: 30000 hours. Stainless steel construction.

More information about NY Brew Supply W3850-CV #ad


Similar products