As an Amazon Associate I earn from qualifying purchases.









1. NIBCO
#ad
C5807LT 11/2 HXH 90 LONG TURN ELB ABS
#adNIBCO #ad - Meets specifications astM D2661 and D3311 for quality assurance. Abs-dwv for chemical and corrosion resistance, performance under wide temperature ranges, and light weight for quick assembly.More information #ad
90-degree elbow for connecting two pipes or fittings at an angle. Smooth interior finish for reduced friction and material buildup. Hub ends for connecting to male unthreaded pipes or fittings.Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Height | 4.45 Inches |
Length | 4.56 Inches |
Weight | 0.15 Pounds |
Width | 2.26 Inches |
Part Number | I05700C |
Model | C5807LT112 |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad
2. Charlotte Pipe
#ad
CHARLOTTE PIPE 3X3X1 1/2 DWV SAN TEE REDUCING HUBXHUB DWV DRAIN, WASTE AND VENT 1 Unit Piece
#adCharlotte Pipe #ad - For use where systems will not exceed 140° F. Made in the usa: for over a century, 400 loyal, charlotte pipe has been manufacturing pipe and fittings, employing more than 1, hard-working Americans.More information #ad
All of our products are proudly made in the USA. Not intended for pressure use. Lightweight, easy to install. Black fittings used in sanitary drain, and vent DWV, waste, sewer and storm.Brand | Charlotte Pipe #ad |
Manufacturer | Charlotte Pipe #ad |
Height | 4 Inches |
Length | 5.69 Inches |
Weight | 0.7 Pounds |
Width | 5.31 Inches |
Part Number | ABS 00401 1200HA PC |
Model | ABS004011200HA |
More information #ad
3. NIBCO
#ad
I01455H U580127 11/2 SPGXSJ TRAP ADAPTER ABS, 1-1/2" U580127112, Black, NIBCO
#adNIBCO #ad - Spigot on one end and slip joint connection on the other for connecting pipes to create a seal against leaks. Meets specifications astM D2661 and D3311 for quality assurance.More information #ad
Smooth interior finish for reduced friction and material buildup. Abs-dwv for chemical and corrosion resistance, performance under wide temperature ranges, and light weight for quick assembly. Adapter for connecting pipes or fittings of different types.Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Weight | 0.11 Pounds |
Part Number | I01455H |
Model | U580127112 |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad
4. NIBCO
#ad
Black, NIBCO U5810 2 HXHXH 45 WYE ABS, 2" U58102
#adNIBCO #ad - Hub ends for connecting to male unthreaded pipes or fittings. Meets specifications astM D2661 and D3311 for quality assurance. Smooth interior finish for reduced friction and material buildup.More information #ad
Abs-dwv for chemical and corrosion resistance, performance under wide temperature ranges, and light weight for quick assembly. Wye with three openings for connecting and branching three pipes.Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Weight | 0.2 Pounds |
Part Number | I09025H |
Model | U58102 |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad
5. NIBCO
#ad
U5895 11/2 HXH P-TRAP W/UNION JOINT ABS
#adNIBCO #ad - Meets astm d2665, and d3311 standards, is ul listed and csa certified for quality assurance, D2661, D3965, and meets NSF standard 14 for potable water. Trap for creating a water seal in DWV systems to prevent gases from entering occupied spaces.More information #ad
Hub ends and a union joint for connecting to male unthreaded pipes or fittings. Operating temperature range of -40 to +180 degrees F. Abs for strength and resistance to impact and a range of chemicals.Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Weight | 0.4 Pounds |
Part Number | I00595H |
Model | U5895112 |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad
6. Genova
#ad
3", Genova Products 80630 ABS-DWV 45-Degree Elbows
#adGenova #ad - Model number: 80630 Geneva products 80630 3" aBS-DWV 45 Elbows. Sometimes called an Eighth Bend. This product is manufactured in Canada.More information #ad
Brand | Genova #ad |
Manufacturer | Genova Products Inc #ad |
Height | 4.5 Inches |
Length | 4 Inches |
Weight | 0.45 pounds |
Width | 7.5 Inches |
Part Number | 80630 |
Model | 80630 |
More information #ad
7. NIBCO
#ad
3", NIBCO 5817 Cap Hub, ABS DWV
#adNIBCO #ad - Astm d2665 and astm d3965. Nsf u. P. Nsf/ansi standard 14. Service temperature -40°F to 180°F. Ul listed 94V-0 Csa b181. 1. Certified. Astm d2661 and d3311. Do not test or use with compressed air or other gases.More information #ad
Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Height | 2 Inches |
Length | 4 Inches |
Width | 4 Inches |
Part Number | 5817 |
Model | I175151C |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad
8. NIBCO
#ad
Trap, 1-1/2" Hub x Slip Joint, NIBCO 5893 Series ABS DWV Pipe Fitting
#adNIBCO #ad - Trap for creating a water seal in DWV systems to prevent gases from entering occupied spaces. Smooth interior finish for reduced friction and material buildup. Meets specifications astM D2661 and D3311 for quality assurance.More information #ad
Abs-dwv for chemical and corrosion resistance, performance under wide temperature ranges, and light weight for quick assembly. Hub opening on one end and slip joint connection on the other for connecting two unthreaded pipes.Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Height | 5.88 Inches |
Length | 10.32 Inches |
Weight | 0.49 Pounds |
Width | 2.81 Inches |
Part Number | I603000 |
Model | 5893112 |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad
9. LASALLE BRIS
#ad
Lasalle Bristol 632251 1-1/2X90 ABS 90 Degree Elbow
#adLASALLE BRIS #ad - Package dimensions : 3. 75 l x 2. 5 h x 3. 75 w inches. Package weight : 01 pounds. Made in United States. 1-1/2' bend 1/4.More information #ad
Brand | LASALLE BRIS #ad |
Manufacturer | LASALLE BRIS #ad |
Height | 2.2 Inches |
Length | 4 Inches |
Weight | 0.15 Pounds |
Width | 3.5 Inches |
Part Number | 632251 |
Model | 632251 |
More information #ad
10. NIBCO
#ad
U5808 11/2 HXH 22 1/2 ELBOW ABS
#adNIBCO #ad - Hub ends for connecting to male unthreaded pipes or fittings. Smooth interior finish for reduced friction and material buildup. Abs-dwv for chemical and corrosion resistance, performance under wide temperature ranges, and light weight for quick assembly.More information #ad
22. 5-degree elbow for connecting two pipes at an angle. Meets specifications astM D2661 and D3311 for quality assurance.Brand | NIBCO #ad |
Manufacturer | NIBCO INC. #ad |
Height | 2 Inches |
Length | 2.5 Inches |
Weight | 0 Pounds |
Width | 2.5 Inches |
Part Number | I07930H |
Model | U5808112 |
Warranty | NIBCO INC. warrants each NIBCO® plumbing plastic fitting (including plumbing valves) to be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date of purchase. |
More information #ad